- This topic has 1 reply, 2 voices, and was last updated 8 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I will probably and up end up cutting a section out of the back panel in order to access the SD card without unscrewing.
on the same topic, someone posted on the main forum about replacing the 4 screws on the back with Brass Knurled Screws (6-32 x 3/8) from Home Depot. Also a good idea.
McMaster-Carr has low-profile head (3/16″ height) thumb screws that might work:
http://www.mcmaster.com/#95488a152/=11lmyk0
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Hardware Modding’ is closed to new topics and replies.