Building own Wifi-Frame

[StarFish]

Hello there,
first i tinkered a little bit with WS2812 and ended up printing a frame and trying to build my own GameFrame.
Actually i use a “nameless” Wifi-ESP-Wroom-32 and build my own code.

Can i just swap over to the Wifi Code for a Photon? Or do i have to insert a Photon?
And can i copy the wiring according to the Teensy-PinOut, or is there something special about your Wifi-Adapter?

Any help appreciated

Regard
Patrick

[Jeremy Williams]

There’s definitely particle specific code in the WiFi source. I would just start with the V2 source and build up from there for your other chip.

[StarFish]

Hey,
Thanks for the answer. I’ll try to get it running with my controller.
I assume I will end up using a particle. 😅
What about the WiFi adapter? Does it just change the pinout for the components from teensy to particle?

[Jeremy Williams]

The adapter just routes the pins to Teensy pinout. There is no special sauce.

[Author]

Posts